The perfect drill for beginners and advanced users
A drilling machine has an attachment so that holes can be drilled in different materials. The drill is operated by means of an electric motor. The drill can then turn into the material in rapid rotary motions. The material can be concrete, stone, metal, plastic or wood.
Which drilling attachment for which material?
For each material the suitable attachments are offered. The drilling attachments are precisely matched to the hardness of the material. If you try to drill with an unsuitable attachment for the respective material, you will not succeed. Rather, you are most likely to damage the drill and the material. A drill that is too soft for the material can also break off. This also increases the risk of injury. Drill bits are available in many different diameter thicknesses. This allows you to drill holes of different sizes in all materials using a drill.
Functionality of a drilling machine
The design of the modern drilling machines is ergonomic and pistol-like. The machines are designed differently in terms of colour. There is a pressure switch in the handle of the drilling machine. The switch function for a choice of right and left rotation is also within easy reach. If the attachment drills inadvertently so that it cannot be removed from the material without further ado, the switching function of the running direction offers a very good function. This makes it very easy to remove the drill from the material. With the appropriate attachment, screws can also be turned into a material, for example. And screws can also be loosened very easily using the left-hand rotation. If you choose a machine with these functions, increase the possibilities of use at the same time, because the machine can be used for very different tasks.
The housing of the modern machines is impact-resistant. Even if the machine should fall down accidentally, it will not be damaged. There is a handle behind the drill chuck so that you can handle your drill perfectly. This also makes it easier to check the pressure applied when drilling. And with two hands the machine can also be controlled and guided much better.
For very stubborn and robust materials, the use of a drilling machine with impact function is recommended. This function can usually be used via a separate switch. And by means of a practical quick-action chuck, the drills can be changed very easily and uncomplicatedly. You can loosen and lock the drill with a single movement. The drill chuck key, which was required for the use of a drill chuck with gear rim, is therefore no longer required. Changing drills has never been easier or easier.
Structure of a drilling machine
The drill has a motor that is powered by electricity. In addition, the machine has a gearbox and a drill chuck. Further components of the drilling machine are a fan and carbon brushes. The overall design of the machines is stable and extremely robust, making them ideal for frequent and intensive use on a construction site. Rechargeable drilling machines are extremely practical and popular. With these devices, you do not have to rely on a nearby power outlet for the necessary measures. The cordless drill is also easier to handle if you make a direct comparison with a wired machine. Without disturbing power cables, the work can be carried out completely easily and unloaded. Modern cordless drills are powerful and can be used for all materials. For more extensive work, it is advisable to have a spare battery ready for use. The well-known quality manufacturers offer a wide range of accessories for their machines. This means that all parts can also be purchased if necessary.
Types of drilling machines
There are basically many different types of machines on the market, so you will find a wide range of machines to choose from. The right machine is offered for every special purpose. If you primarily want to drill holes in very soft materials, you can use a manual hand drill. With little effort and very accurately, holes can be easily drilled with the hand tools. This type of drilling machine is particularly suitable when the material into which holes are to be drilled is very fine. With a hand drill you determine the speed yourself, so that the material is spared as much as possible. These drills are especially recommended for handicrafts.
Drilling with an electric machine is simpler and more efficient. The powerful engines and the very good torques deliver perfect results. Equipped with different speed levels, this machine allows you to handle different jobs very easily. The most popular machines are those that offer stepless speed regulation. And thanks to the second handle, you can use an electric drill to exert pressure very well with both hands. This means that all drillings can be carried out safely and reliably. With a percussion drilling function, drilling in very solid concrete or masonry is also extremely easy. The drill seems to penetrate the material easily. Due to the large number of hits on the drilling attachment, drilling holes is made much easier. Where before With a conventional machine that required a lot of effort, the work is now almost child’s play. The switchable impact function is mainly used when drilling into stone or concrete. A striking function is not required for drilling in wood or metal. It can then be easily disabled by turning a lever.
If you only want to drill into masonry and work on it, we recommend the purchase of a hammer drill. With this machine you can drill and also chisel electrically. With the enormous power of a hammer drill, you can carry out all the necessary work very efficiently. Compared to a percussion drill, the hammer drill is heavier due to the weight of the equipment. The hammer drill offers you the possibility of carrying out strenuous chiselling work with the machine. Even seemingly hardest materials are processed quickly and easily by a hammer drill. With little effort compared to conventional working methods you get maximum success.
You must pay attention to this when buying a drilling machine.
Depending on what work you want to do with the drill, the new machine should have the necessary power. For this reason, you should pay attention to the wattage of the device when purchasing the machine. For stone and masonry work, the selection of a percussion drill or a hammer drill is recommended. If the new machine is to be used for woodworking, you can dispense with the impact function of a drill and choose a standard tool. In principle, impact drills have a high wear and tear and a shorter service life compared to a regular drill. This is due to the enormous loads that the machine with impact function is subjected to. to fulfill. Without the impact function, a drill can provide excellent service for many years.
If you would like to work independently of mains power, a battery-powered machine is recommended. These drills are charged within a very short time and perform well. The Li-Ion batteries can be recharged at any time. You can work very flexibly with this machine without disturbing power cables. And if longer and more extensive work is to be carried out, then this is easily possible with the appropriate replacement batteries. Many well-known manufacturers keep a special accessory equipment, so that the replacement batteries can be bought easily.
Another purchase criterion is the weight of the machine itself. High-quality drilling machines with a very good power transmission have a dead weight of between two and three kilograms. If this is too much weight for you, then you will also find lighter machines, which, however, do not reach the performance limits of high-quality machines. If you have chosen a machine, then you should pay attention to the accessories. Additional drill chucks or attachments should be available for all necessary work. And if you have decided on a battery device, then you should make sure that the appropriate replacement batteries from the manufacturer are also available. Basically it is recommended to buy the original accessories for the machine.
purchasing sources
There are several ways to purchase your new drill. On the one hand, competent specialist consultants are available to you in the specialist trade, who will inform you exactly about the advantages and disadvantages of the various machine models. You will also find a good selection of machines in DIY stores. When buying in a shop, you should always make a price comparison. Here it can be too big Price differences that you can take advantage of.
If you have already decided on a certain machine model, the Internet offers you a very good opportunity to use the best price for yourself in order to save money. The selection of machines on the Internet is very large. It is very easy to use the cheapest offer. Many Internet providers now deliver without additional shipping costs. This makes the offers very attractive. For this reason, you can take advantage of the price advantage right away. If you order your desired machine online, it will be delivered to your door within a few days. You can’t save any more money and time.
Recommended machine manufacturers
Drilling machines are offered by different manufacturers. The manufacturers who offer high-quality machines are, for example: Makita, Bosch, or Metabo. Makita is well known for the hammer drill. The machines are very powerful so that all work can be carried out very quickly and efficiently.
Bosch drilling machines are available in numerous variants. Bosch offers a wide range of machines. This makes it easy to find the right Bosch machine for every job. The machines are manufactured to a high standard and have a long service life.
Metabo is known for its excellent impact drills. With these devices you can carry out all work around the masonry easily and uncomplicatedly. In the meantime, many machine models are also available as battery versions. This enables you to work even more flexibly with a Metabo machine.
The manufacturers of drilling machines presented here also offer a wide range of accessories. This means that supplements or spare parts for the machine can always be purchased without complications.