A changing table radiant heater is usually indispensable in households with babies or small children. It is a matter of course for the parents that the little darlings have it as warm and dry as possible when they are changing diapers and after the bath, because they freeze especially at night or after the bath. Pleasant warmth also has a beneficial effect on babies and lifts their spirits. It makes them want to play or cuddle with mum or dad when they are changing diapers, which promotes the bond. When buying a changing table radiant heater it is therefore important to consider several factors before buying one.

What is the changing table radiant heater?

The changing table radiant heater is a kind of heat lamp, which is usually mounted above a changing table in order to indicate it to the baby during the changing process. The use of changing table radiant heaters depends on the season or better on the climatic conditions in which the child is changed.
The focus is on the idea that the child has a warm enough diaper or clothing change to avoid a cold. The changing table radiant heater is a functional aid that can be attached or set up above or in the changing chest in the immediate vicinity of the child. There are wall and floor units
which have advantages for the parents as well as for the little ones. However, it makes sense not to ignore the spatial circumstances when purchasing the changing table radiant heater.
The functionality of the changing table radiant heaters varies greatly. There are devices that emit heat in a target-oriented manner, as do infrared emitters. This means that only the Kin and the direct surroundings on the changing table are kept at a pleasant temperature, the rest of the room is not warmed up at the same time. This results in considerable energy savings!

Functionality of a radiant heater for the

diaper-changing table

The heating radiator has both a simple and an efficient function, which speaks for an acquisition. The majority of such devices are switched on at the push of a button or a pull on the drawstring. All of them have to be warmed up for a few minutes. Once a changing table radiant heater has reached the desired temperature, changing the diaper, dressing or undressing, for example, can begin.

Save energy when heating!

Modern radiant heater models have the advantage that they emit heat immediately after being switched on. This means that parents no longer have to wait before they can diaper their child on the changing table.
Classic models, on the other hand, have the advantage that they also warm up the immediate surroundings after commissioning. In fact, this results in higher energy consumption, but heat can still be felt for a while after the wrapping process and this can be very pleasant for the parents, especially in the cold season.

Areas of application and advantages of the devices

A changing table radiant heater has many advantages! The device primarily makes it possible to provide the baby with a warm and pleasant atmosphere before and during diaper changing. If the little one is placed on the changing table with its lower body exposed, it could catch a cold, because the little ones are particularly sensitive and react quickly to the cool temperatures. It is therefore important to provide a pleasant environment in which the little one feels at home and at ease.
Thanks to a pleasant ambient temperature, the child is more open to playing with his parents and enjoys being together all the more. A good opportunity for intensive cuddling sessions with the parents which strengthens the parent-child bond. Parents can play, cuddle and also talk with the child on its changing table for longer in the pleasant environment, while it’s being wrapped.
Most babies enjoy the moments without clothes in which they move freely and carefree. You will also enjoy the loving cuddles of the present parent. There’s nothing nicer for the little one!
Even after the “diaper age” the changing table radiant heater can still be used. In the workshop area or in the hobby cellar, it provides a feel-good atmosphere during handicrafts for Christmas or Easter.

Types of changing table radiant heaters

a. Infrared heater

Modern changing table radiant heaters operate on an infrared basis and emit heat only in defined areas where elevated temperatures are required. The ambient air is not heated so that consumption can be kept low.

b. The classic radiant heaters

The classic models emit more heat and also supply the environment with it. A larger part of the room is supplied with heat. The consequence is higher heating costs for the radiator.

The individual models have a different performance!

Radiant heaters – models which were developed to heat the changing table in the bathroom or children’s room are already convincing with an output of 600 watts. Classical heaters can reach up to 1,200 watts.
The output of infrared radiant heaters is rather low than it is. The targeted temperature control without heating the environment is sufficient for heating the changing table surface, which saves energy!

Protection and safety

When using electrical equipment, the safety aspect is very important. An automatic switch-off is indispensable.

If the changing table heater is forgotten after changing, it switches itself off automatically after about 10 to 20 minutes. This saves money and prevents overheating until fire.
When purchasing, pay attention to the automatic switch-off electronics of the Alternatively, an intermediate timer is very useful. The timer can be set so that the device switches itself off automatically after a certain period of time.

Functionality and reliability

The ideal changing table radiant heater ensures targeted heating of the changing table surface without warming up the surroundings. The warm-up phase should only be short to avoid wasting energy.

What should I look out for when buying the changing table radiant heater?

Pay attention to energy consumption when purchasing the changing table radiant heater. In general, devices with the powerful modern infrared technology which emit heat only where it is needed score points.
Many devices also heat up the ambient air, which can lead to overheating in the winding area. The wide distribution of warm air is associated with considerable energy consumption and therefore high costs.
The fact that the baby is not only changed on its changing table, but is also played with and cuddled with it, moisture or creams can come into contact with the heat shield of the radiant heater while playing. Therefore, a device must have moisture or heat protection so that sparking or vapour formation is reduced to a minimum.
The purchase of a changing table radiant heater is not particularly inexpensive. Parents have to dig deeper into their pockets to do this.
Changing table radiant heaters should ideally be equipped with particularly powerful, energy-saving heating elements.

Leading manufacturers of radiant heaters

reef

Reer GmbH is a reliable and important supplier of high quality electronic components to companies such as..: AEG, Bosch, Siemens etc. Reer GmbH also manufactures electronic products and spare parts for electronic baby products.
Bottle warmers, The focus is on radiant heaters for the changing table and many other products. The automatic bottle warmer Mabo has been demonstrating the class, quality and excellent price-performance ratio of Reer products for years.

Rommelsbacher

The company Rommelsbacher was founded in 1928. Its products include small electrical appliances for the household in general and electronic baby articles, such as the changing table radiant heater. Rommelsbacher is active both nationally and internationally on the market and this with constantly growing success.

fakir

The Fakir Group is headquartered in Kleinglattbach, Baden-Württemberg. The company primarily produces and develops systems and equipment for floor cleaning. Since 1950 and before the beginning of the 80s further production groups were added, as well as various electronic devices and accessories for household and baby articles such as the changing table radiant heaters.

EWT

EWT, an independent subsidiary of the Glen Dimplex Germany Group, is based in Kulmbach. EWT products are internationally known.
EWT’s product portfolio includes electric fireplaces, changing table radiant heaters, heating and cooling appliances of all kinds.

Steba

The Steba Group is known for high-quality automatic baking ovens, heaters, ovens and many other innovative electronic products. Stella has long been a household name internationally and also manufactures changing table radiant heaters.

Here we present you two modern energy-saving changing table radiant heaters:

Reer 1928 2in1 FeelWell Changing table radiant heater, floor unit

The Reer 1928 2in1 FeelWell Baby Changing Table Radiant Heater protects the baby from cooling down and thus from possible secondary illnesses. It can be used as a wall-mounted as well as a stand-alone unit. This radiant heater has two heating stages with 400 W and 800 W. He is particularly flexible thanks to a heating head that can be tilted up to 50°. The device can be switched on and off with only one hand via a pull switch. Customers are enthusiastic about this device and give it the full score.

Keine Produkte gefunden.

Einhell infrared radiant heater IHS 2000/1 (2000 Watt, 3 power settings, pull switch, adjustable up to 186 cm, noiseless)

The Einhell infrared changing table heater can be used in many different ways. It has very effective quartz heating rods and is easy to regulate with 3 power levels of 650, 1300 and 2000 W. The set switching step is displayed. The existing overturning protection of the radiant heater switches it off when it overturns.
The standpipe of the device is height adjustable. This radiant heater is also highly valued and appreciated by its owners. Not only does it serve well at the changing table, it can also provide a feel-good atmosphere in the winter garden.

Keine Produkte gefunden.

Conclusion:

Modern changing table radiant heaters are functional, powerful, energy-saving and visually appealing. It is recommended to choose devices that can be mounted or set up in a few easy steps. Compared to the floor-standing units, permanently installed wall-mounted units guarantee additional safety.
The floor-standing units usually have wide, stable legs that ensure maximum stability.
The average output volume of modern heaters with infrared technology is approx. 600 watts. Rely on more powerful devices to be able to use them later. It is worth investing in a device that initially guarantees gentle heating at the changing table and which can later be equipped with stronger heating elements.